A Little Library is a great way to engage people of all ages with free books for the community. Place a Little Library by playspace benches to create a calming area for adults and children alike!
Sort all materials into piles by like items to ensure you have materials needed to complete project.
Take the 4x4x8' board. Cut into [1] 60" piece and [2] 10¾" pieces.
Take the 2x6x8' board. Cut into one 19" piece. You can use the remaining wood for another project.
Take the 4x8' plywood board. Cut, according to the diagram, [2] 19"x21 ⅛" pieces, [2] 12"x27 ⅛" pieces, [2] 22"x11 ½" pieces, [1] 19x10 ¾" piece, and [1] 18 ½"x16 ⅛" piece. Use the chalk line to help mark each measurement.
Take the Plexiglas sheet. Measure out [1] 13"x15" piece. Place tape over the measuring lines on both sides of the Plexiglas to make cutting smoother. Cut using the circular saw.
Angled Cuts:
If the Little Library will be painted, prime all sides and edges of the plywood pieces.
Inventory and sort all of your materials.
Use the 1" deck screws to attach the side panels (12"x27⅛") to the floor panel (10¾" x19"). Be sure the side panels are centered on the floor panel.
Next attach the back panel (21 ⅛"x19") to the floor panel and side panels. The back panel will fit inside of the two side panels.
Next use the small screws to attach the Plexiglas panel to the front window panel (18 ½"x16⅛"). Pre-drilling the holes will help prevent the Plexiglas from cracking.
Then attach the front window panel with Plexiglas to the front panel (21 ⅛" x 19") using the small hinges provided (where the red circles are). Be sure that you are spacing the hinges appropriately so that the window panel covers the entire hole on the front panel.
Attach the front panel you just built to the Little Library using the 1" deck screws.
Attach 1 of the 2 roof panels (22"x11 ½") to the front of the Little Library using the 1" deck screws.
Attach the 2nd roof panel (22"x 11 ½") to the back half of the little library using the 1" deck screws.
Take the 4x4x5' post and center it on the 2x6x19" board. Then attach the two 4x4x10 ¾" trapezoid braces to opposite sides of the 4x4x5'. Attach the trapezoids using the 3" lag screws provided. Pre-drilling holes will make this easier.
Flip the stand over and attach the Library to the stand using the 2" lag screws provided. Pre-drilling these holes will make this easier.
Dig a hole that is 2' deep and roughly 6" wide. Concrete the Little Library in place with 1-2 bags of concrete.
Paint as desired.
KABOOM! is a national nonprofit that works to achieve playspace equity. Kids who don't have access to play miss out on childhood and are denied critical opportunities to build physical, social and emotional health.
We team up with communities to build incredible playspaces that help give every kid the opportunity to thrive.
Our goal is to end playspace inequity. For good.
Sign up for our emails to learn more about our work and how you can help KABOOM! create sparks for change.
Sign up!
Adults and children appreciate having plenty of seating areas in and near their playspace. Benches encourage adult supervision when placed in close proximity to the playground equipment. Seating also encourages a sense of community by creating a designated area for neighbors to gather together, much like a "town square."
Games like chess and/or checkers can be played by people of all ages, and providing this opportunity will encourage youth, teens, adults, and seniors to frequent the playspace. These games can also be a perfect catalyst for playspace programming! They can also add to the beautification of a playspace. Ideally, this project involves adding a twist to existing, ordinary picnic tables.
Adding garden beds to your playspace gives children the opportunity to learn more about where food comes from and how vegetables and flowers grow. Edible plants can add many great sensory elements to enhance your space!